Nice ROBUS600 24Vdc gate motor for sliding gates up to 600Kg

Nice ROBUS600 24Vdc gate motor for sliding gates up to 600Kg

Electromechanical gear motor with Nice BlueBUS technology. Versions with electromechanical limit switch (ROBUS600) .

Nice BlueBUS technology:- Power and control a maximum of seven pairs of photocells from the MoonBus series using two wires only.

The control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: ROBUS600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a fl ashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

Battery Backup OptionYes
IP Rating44
Max Gate Weight600Kg
Motor Voltage24Vdc
Solar Power OptionYes
Work Cycle40

Write a review

Please login or register to review
  • : 6161
  • Brand: Nice
  • Product Code: RB600
  • Availability: In Stock