Nice Run RUN2500I 230Vac motor for sliding gates up to 2500Kg
Ventilated motor with built-in inverter. Electromechanical gear motor with Nice BlueBUS technology.
Compatible for operation with Solemyo and Opera systems.
Simple to install: the BlueBUS system enables connections by means of just two wires between the control unit and up to 15 control safety and signalling devices.
Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions, while adapting the thermal cut-out protection
and intensity of self-ventilation, depending on the temperature reading.
A master/slave selection also automatically synchronises 2 motors, enabling the automation of sliding gates with two opposing leafs. (built-in inverter)
Practical and functional: built-in inverter, housed inside Run, can be simply connected by means of the practical connector guide.
Very quiet: gear motor on bearings.
Perfect movement: the inverter enables the power supply and drive of the 3-phase motor with single-phase current at 230 Vac, acting on the frequency to adjust speed of the automation from a minimum of 8.2 m/min to maximum 15.4 m/min. In the automation deceleration phase, the inverter, which dialogues with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles.
|Max Gate Weight||2500Kg|