Nice RUN400KIT HS 24Vdc high speed sliding kit for gate up to 400Kg
High speed motor for automatic sliding gates weighing up to 1200kg, rapid manoeuvres, with opening and closing speed up to 70cm/s.
- RUN400HS - Fast Sliding Gate Motor
- EPMB - Pair of Photocell
- Oxi - Receiver
- ON2E - 2 Channel Transmitters
User-friendly: thanks to the Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signalling devices, using two wires only.
Practical: the control unit and PS524 battery charger can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.
|Battery Backup Option||Yes|
|Max Gate Weight||400Kg|